Your scanner is designed to be maintenance-free. However, constant care and maintenance can keep your scanner working smoothly.
Cleaning The Scanner
Paper powder, dust, ink and toner from paper being scanned may make the inner ADF dirty, which leads to poor image quality or document-feeding errors. How often to clean your scanner depends on the type of paper and number of pages being scanned.
Perform the following procedures to clean the scanner surface and the ADF unit. Gently wipe locations described herein. Do not rub too hard!
Warnings
● Before cleaning the scanner, turn off the scanner and disconnect the scanner’s power cable and USB cable, and then wait a few minutes for the glass and/or the inner ADF to cool to ambient temperature.
● Wash your hands with soap and water after cleaning the scanner.
Cleaning Materials
Have the following cleaning materials ready to clean the scanner:
● Soft, dry, lint-free cloth (or a cotton swab)
● Non-abrasive cleaner—Isopropyl alcohol (95%). DO NOT use water.
● or an Alcohol wipe such as the ones sold on Raven.com.
Attention
● Alternatively you can use glass cleaner or neutral detergent for windows cleaning to clean the scanner glass.
● However, DO NOT use either of them to clean the ADF feed roller or pad module.
● Use of other cleaning materials could damage your scanner!
Cleaning the Touch Screen
Wipe the Touch screen Monitor with an alcohol wipe first then wipe it with a dry cloth such as a microfiber cloth.
Cleaning the ADF
After using the scanner for a long period of time, the rollers and glass inside the scanner may become contaminated with ink, toner particles or paper dust. It is necessary to perform routine cleaning to ensure the optimum image quality and performance.
Tip! If documents do not feed easily, if several documents feed at the same time or if streaks appear on the scanned images, it is time to clean your scanner.
- Wet a clean cloth with some isopropyl alcohol. (95%) or use an alcohol wipe.
- Press the ADF Release button to open the front door to the left. Wipe and rotate
the ADF Roller until the surface is completely removed from dust. - Wipe the rubber part of the ADF pad. Be careful not to damage the pick springs.
- Close the scanner front cover. Your scanner is now ready for use.
Cleaning the Glass
- Press the ADF Release button. Open the front door to the left.
- Wet a clean cloth with some isopropyl alcohol. (95%) or use an alcohol wipe.
- Wipe the glass and the white area as illustrated below to rid the dust or dirt.
