Replacing the ADF Roller
After scanning approximately 200,000 pages through the ADF, the ADF rollers may be worn out and you may experience problems with document feeding. In this case, you may need to replace a new ADF roller. For ordering the ADF roller, please email Raven support at support@raven.com or call 1-800-713-9009 to order a replacement.
Disassembling Procedure
- Press the ADF Release button to open the ADF front door.
- Push up on the cover to prop into a workable position.
- Pull the right side of the ADF roller towards you
- The roller will detach and pull out of its setting.
Reassembling Procedure
- Insert the left end of the ADF roller first to its slot and place the ADF roller to its proper position.
- One in place, push the ADF cover back into place.
- Close the ADF to complete installation.
Replacing the Reverse Roller
After scanning approximately 100,000 pages through the ADF, the Reverse Roller may be worn out and you may experience problems with document feeding. In this case, you may need to replace a new ADF reverse roller. For ordering the reverse roller, please email Raven support at support@raven.com or call 1-800-713-9009 to order a replacement.
Disassembling Procedure
- Pull the Front Panel Release lever.
- Locate the pull tab to the right and pull toward you.
- With the cover tray open, locate the blue lever on the roller. Push up to unlock the roller.
- Locate the white wheel to the right, and gently pull the roller at an angle towards you to remove.
Reassembling Procedure
- Insert the left end of the Reverse Roller to the hole of its original place.
- Insert the right end of the Reverse Roller to its slot.
- Push the blue lever down to lock into place.
- Close the Reverse Roller Cover.
- Close the Front Cover.