Install the Scanner
Plug the small end of the power adaptor into the power jack of your scanner. Insert the other end to an appropriate power outlet.
Turning On/Off Your Scanner
- To turn on the scanner, press the Power Switch button on the front panel, the Power LED will flash. When it is finished and ready to scan, the LED indicator will stop flashing and become steadily on.
- To turn off the scanner, press the Power Switch button for about 3 seconds, the Power LED will be off.
Connect to Your Computer
Connect the square end of the USB port to your scanner. Connect the rectangle end to the USB port at the rear side of your computer.
Download and Setup Raven Desktop
Visit raven.com/desktop to download Raven Desktop and follow the on screen instructions to download our latest drivers.
Step 1. Download Desktop Step 2. Choose a Scanner Connection
Step 3. Choose USB Connection Step 4. Download Drivers
Step 5. Enjoy Your Raven Desktop! For more info on how to use it, check out the Desktop section of the Help Center here!
Now your Raven Select(Standard) is ready to go!
If you need any help or have any questions along the way, please don't hesitate to reach out to customer support at 1-800-713-9009 or firstname.lastname@example.org.